Food Inspections

El Salvador Restaurant

Inpection Notes

11A - proper cooling methods used: adequate equipment for temperature control 511-6-1.04(6)(e) - cooling methods (pf, c) Points: 3 Corrected during inspection?: Yes Repeat: No Inspector Notes: Rice and Beans was observed covered while cooling. 511-6-1.04(6)(e) - Cooling Methods (Pf, C) (e) Cooling Methods. 1. Cooling shall be accomplished in accordance with the time and temperature criteria specified under DPH Rule 511-6-1-.04(6)(d) by using one or more of the following methods depending on the type of food being cooled: (i) Placing the food in shallow pans; Pf (ii) Separating the food into smaller or thinner portions; Pf (iii) Using rapid cooling equipment; Pf (iv) Stirring the food in a container placed in an ice water bath; Pf (v) Using containers that facilitate heat transfer; Pf (vi) Adding ice as an ingredient; Pf or (vii) Other effective methods. Pf 2. When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be: (i) Arranged in the equipment to provide maximum heat transfer through the container walls; and (ii) Loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food. Note: Rice and Beans was immediately uncovered during the inspection. 14A - in-use utensils: properly stored 511-6-1.04(4)(k) - in-use utensils, between-use storage (c) Points: 1 Corrected during inspection?: Yes Repeat: No Inspector Notes: Scoop with no handle observed stored in food item. 511-6-1.04(4)(k) - In-Use Utensils, Between-Use Storage (C) (k)Storage of In-Use Utensils. During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored: 1.Except as specified under paragraph 2 of this subsection, in the food with their handles above the top of the food and the container; Note: Scoop was immediately removed during the inspection.

Back to Food Inspections