Tuesday October 22nd, 2024 6:19PM

Food Inspections

TAQUERIA LUPITA

87
2988 GILLSVILLE HWY STE 108
Inspected by: Adetayo Adewolu
Inspection Date: 07/24/2024
Inpection Notes

Violation of Code: [511-6-1.06(2)(l)] Hand sink was observed next to the Vegetable prep sink in the kitchen with no splash guard. 511-6-1.06(2)(l) - Handwashing Sinks Location/Placement (Pf) (l) Handwashing Sinks, Location and Placement. A handwashing sink shall be located: 1. To allow convenient use by employees in food preparation, food dispensing, and warewashing areas. New Violation. 4-2B Violation of Code: [511-6-1.05(7)(a)1] Accumulated food debris was observed inside the microwave oven unit. 511-6-1.05(7)(a)1 - Equipment, Food-Contact Surfaces,& Utensils (Pf) (7) Cleaning of Equipment and Utensils. (a) Equipment, Food-Contact Surfaces, and Utensils. 1. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Pf. Corrected On-Site. New Violation. 11D Violation of Code: [511-6-1.05(3)(g)] Facility has one metal stem thermometer that starts at 100 Degrees Fahrenheit. 511-6-1.05(3)(g) - Food TMD, Provided and Accessible; Appropriate TMD for Measuring Thin Foods (Pf) (g) Food Temperature Measuring Devices. 1. Food temperature measuring devices shall be provided and readily accessible for use in ensuring attainment and maintenance of food temperatures as specified under DPH Rule 511-6-1-.04. Pf 2. A temperature measuring device with a suitable small-diameter probe that is designed to measure the temperature of thin masses shall be provided and readily accessible to accurately measure the temperature in thin foods such as meat patties and fish filets. Pf. New Violation. 16B Violation of Code: [511-6-1.06(2)(d)] Ice Machine was observed in the kitchen with a drainage pipe that did not drain into an open drain site with a 1 inch air gap. 511-6-1.06(2)(d) - Backflow Prevention, Air Gap (P) (d) Backflow Prevention, Air Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch (25 mm). P. New Violation.

Back to Food Inspections